3-24x42mm (FFP)

This zoom scope has an 8x magnification ratio.  It is easy to range a target without thinking about where to set the zoom range. Target ranging is accurate at any power. This 3x-24x Compact model comes in two versions. The Mil Radian (Mil) and the Minute of Angle (MOA). The short compact overall size yet strong build quality as you would expect from a MARCH scope.

It comes in illuminated and non-illuminated versions. Standard and Low illumination modules are available. Both modules provide four levels of reticle intensity (red) and can be cycled by simply pressing the pressure switch within the focus dial on the left side. Very effective feature at dusk or when aiming at a dark target. If illumination is not activated the reticle remains black as per the non illuminated model. Additionally, with the capability to set any position as the zero point in the elevation (0 – set feature), the shooter will never lose their starting calibration

First Focal Plane design allows the scaling on the FML-1 or FMA-1 reticle to remain constant across the entire zoom range, however the reticle scale will get thicker when the magnification is increased. But the special reticle design in the March FFP scopes allows target acquisition at both low and high magnification levels. The special FMA-2 reticle is a very fine lined reticle and therefore only available in the non illuminated model.


  • First Focal Plane (FFP) with 8x zoom ratio.
    • The m-rad(Mil) or MOA reticle scale value remains constant across the entire zoom range.
  • Mil or MOA versions.
  • Mil Version has 28 mils of elevation and windage adjustment.
    • One turret revolution is 10 mils, one click is 1/10th of a mil.
  • MOA Version has 100 moa of elevation and windage.
    • One turret revolution is 25 MOA, one click is 1/4 of a MOA.
  • Side Focus/Parallax adjustment from 10 yards to infinity.
  • Compact/Light Weight design with long eye relief in a 30mm main tube design.
  • Tactical turrets with zero set function on elevation.
  • Illuminated or Non-Illuminated options.
    • Multiple illumination module options, which are user changeable. Including a low illum module that is night vision compatible.
  • Supplied with sunshade, lens covers, and flip caps.
  • Multiple Reticle Options.


ITEM (Low) (High)
Magnification 3x 24x
Effective Lens Diameter 42mm
Body Tube Diameter 30mm
Exit Pupil 7mm 1.75mm
Field of View, real 6.66° 0.83°
Eye Relief 85-100mm 89-96mm
1 Click Adjustment 0.1 Mil or 1/4 MOA
Elevation Travel 28 Mil or 100 MOA
Windage Travel 28 Mil or 100 MOA
Focus Side Focus / Parallax
Distance 10YD-infinity
Finish Matte Black
Total Length (-1D) 312mm
Weight 640g (22.6oz)




3-24x42mm FFP
A 314mm (12.4 inch)
B 139mm (5.5 inch)
C 51mm (2.0 inch)
D 41mm (1.6 inch)
E 81mm (3.2 inch)
F 94mm (3.7 inch)
G 53mm (2.1 inch)
H 48mm (1.88 inch)





Export Info

Export Information

BRT Australia are one of the three World Wide Distributors appointed by DEON OPTICAL in Japan.

We can export to many countries. Our general area of sales includes Australia, New Zealand, South Pacific, South East Asia, South Africa and the Middle East. We also have appointed dealers in New Zealand, South Africa, New Caledonia and UAE.

For Europe area please contact: March Scopes Europe

For the Americas please contact: March Scopes America

* Special note about Zero set facility.

The Zero set or “0- set” facility is designed to work in the lower half of the total range of elevation adjustment. Actually it will work from approx 10 moa above centre to the bottom of the adjustment range on this model. Zero set is handy so that you can return to a set point especially after using the dial for long range shooting. You may have wound the dial a long way and want an easy way to come back to a pre-set stop. Anyone shooting long range should be utilizing a mounting system to forward slope for the scope regardless which keeps the optical centre of the scope approximately in the middle of the total adjustment which will be utilized. For example a 20 moa or 30 moa rail. This is what the zero set feature is designed to work with but it may not work with a 0 slope rail or mount system depending on the functions of the rifle out of the control of a scope manufacturer.