March Scopes can be fitted with a number of manufacturer specific accessories to improve your shooting experience. Here you will find details and information on each one, and what its purpose is.
March Rifle Scopes can be ordered with extra three inch or 75mm (3 inch) long sunshades. These all-metal shades reduce stray light as well as decreasing barrel flare and ghosting off the target.
2-DB179-0: 42mm Scopes
2-DB115-0: 52mm Scopes
2-DB256-0: 56mm Scopes
March Rifle Scopes can be equipped with this Anti Reflective Device (ARD).
DB391-B: 42mm Scopes
DB391-C: 52mm Scopes
DB391-D: 56mm Scopes
MD Disk help to reduce the amount of light coming into a scope by up to 50%, depending on the conditions. This light reduction increases the scopes depth of field and, prehaps more impotantly for competition shooters, reduces the amount of seen mirage. Using a MD Disk at 60 or 80 power gives you a competitive advantage when the conditions turn bad and lets you see the target better than your competitor.
DB062-0: 52mm Scopes
DB269-0: 56mm Scopes
The March Flip Caps can be locked in a fully open position. Designed to protect your scope lenses but allow you to cover and uncover your scopes lenses quickly.
FC-41: Eyepiece of all models
FC-33: 24mm Objectives
FC-51: 42mm Objectives
FC-60: 52mm Objectives
FC-64: 56mm Objectives
March offers optional Leather Caps that not only protect your valuable new scope but also provides a traditional look to a modern piece of optical art.
LC-24: 24mm Objectives
LC-42: 42mm Objectives
LC-52: 52mm Objectives
LC-56: 56mm Objectives
Standard Illumination Switch
This illumination switch offers 4 levels of brightness, and comes standard on many scopes.
Low Illumination Switch
When the situation dictates that the normal illumination switch might be too bright. March offers a Low Illumination Switch that operates at 1/5th the intensity of the standard module and is night vision compatible.
Six Level Illumination Switch
Designed for precision shooting in normal, low light, or night conditions the Six Level Illumination Switch also has a one hour automatic shut down to save battery. Brightness is adjusted by rotating the knurled dial.
Middle Focus Wheel
This optional wheel increases the size of the parallax knob allowing for faster, and more precise parallax adjustment.
2-DB340-0: Fixed Power, EP Zoom and non-illuminated models of 5x032x, 10x-60x.
2-DB341-0: non-illuminated models of 1x-4.5x, 1x-10x, 2.5x-25x, 5x-50x, 8x-80x, 1x-8x, 3x-24x, 5x-40x.
2-DB342-0: Illuminated Scopes
Large Focus Wheel
When precision shooting at close range finer adjustment might be needed on the parallax knob. March offers a large wheel to fit over the Middle Focus Wheel providing precision parallax adjustment that is crucial in some sports like Air Rifle and Rimfire.
Requires a middle focus wheel already be attached.
2-DB343-0: 3.5″ Wheel
2-DB402-0: 4.5″ Wheel
March offers two styles of blank dials for shooters to create their own Ballistic Drop Compensator(BDC) Turrets. Make any changes to your load, and simply replace the tape on the turret. These are also good for Air Rifle, Rimfire, and Short Range Disciplines.
DB392-0: 1x-4x, 1x-4.5x, 1x-10x, 2.5x-25x, 1x-8x, 3x-24x, 5x-40x.
DB393-0: 5x-32x, 10x-60x, 5x-50x, 8x-80x.
This optional Windage Dial reverses the markings found on the standard Windage Dial. Placing the left wind markings on the left, and the right wind markings on the right so shooters can instinctively make quick adjustments.
The Fast Lever attaches to the zoom ring and allows for quicker/easier adjustments of the scopes magnification. It also provides a reference point in your peripheral vision for the current zoom without the shooter having to lift their head to make adjustments.
The March Smartphone Adapter allows you to take photos through your March Scope. The adapter is adjustable. *WARNING DO NOT SHOOT with the Smartphone Adapter Attached. Deon/March are not responsible for phone damage*